
Acrylic Roof Coating
Low-odor, water-based coating for well-drained strip roofs over occupied suites.
How acrylic roof coating worksWe provide roof coating for retail, office, and service-business buildings in Dewey-Humboldt, most of them along SR 69. Tenants get notice and agreed work hours, so their doors stay open.


Roofs along SR 69 in Dewey-Humboldt usually cover several tenants: a shop, an office, a service counter. Nobody wants to close for roof work, so the job is planned around their hours from the start.
Tenants get written notice of the dates, which part of the roof is being worked on, and when the noisier steps happen. Rooftop units that serve each suite are shut down only in short, announced windows while we coat around them.
Small strip roofs carry a lot of equipment for their size. These five spots draw most of our attention.
Each suite often has its own rooftop unit, and every curb is a flashing detail. Corners crack with cold nights, so each curb gets fabric and an extra coat.
Restroom vents, exhaust stacks, and conduit run through the roof in clusters. Rubber boots split in the sun and get replaced before the coating seals around them.
Strip buildings grow in stages, and the joints between old and new sections move. Those seams are opened, cleaned, sealed, and reinforced with fabric before the field coat.
Sign brackets and the front edge face the street and the weather. Loose mounts and gaps in the edge metal let water into the wall above storefronts.
Back-of-building drains and scuppers clog with leaves and grit. Clearing them keeps meltwater from sitting against tenant walls through winter and early spring.
Coating suits occupied buildings because most of the work stays on top of the roof.
A coating goes on from the roof without tearing into the deck, so tenants below keep working through the job. Short, scheduled shutdowns of rooftop units are the main interruption they notice.
The noisy steps on the roof, washing and spraying, can be set for early mornings or closed days. Tenants know when to expect them from the written notice.
Low-odor coatings and a clear schedule keep the job from surprising anyone. Questions go to one contact you choose, so tenants hear one consistent answer.
A white roof reflects part of the July sun, which helps small suites whose rooftop units run hard on hot afternoons along the highway.
Most strip roofs here take one of these two systems.

Low-odor, water-based coating for well-drained strip roofs over occupied suites.
How acrylic roof coating worksFlat sections with slow drains behind the parapet, where meltwater sits for days.
How silicone roof coating worksCall with the suite and where the stain sits. Stains under rooftop units usually trace back to the curb flashing above them.
(928) 436-4811Planning with tenants happens before the first ladder goes up. The roof work follows the usual order.

We inspect the whole roof and note which units, vents, and drains sit above each suite. Moisture readings and photos go into a report you can share with tenants.

Tenants get dates and hours in writing. Repairs to curbs, boots, seams, and edge metal then start in sections, beginning above the suites with active leaks.

Power washing happens at the agreed hours, and water is kept away from rooftop unit intakes. The roof dries completely before any coating goes on.

Coating moves across the roof in sections that line up with the suites below. Each rooftop unit is shut down only for the short time its curb is coated.

A final walk checks every curb and seam. You get photos for your files and a summary you can pass along to tenants.
Dewey-Humboldt sits on SR 69 between Prescott Valley and Mayer.
Most asked
The Town of Dewey-Humboldt has its own Building Safety Department for building permits. Whether a coating job needs one comes down to the scope, so we check with the town before work starts and include any permit in the schedule.
We aim for at least a week in writing, with the dates, the area of roof being worked on, and the hours for washing and spraying. Shorter notice works for urgent leak repairs, with the tenants below that area told first.
Only briefly. Each unit is turned off for the time it takes to coat around its curb and let the coating set near the intake. We coordinate those windows with each tenant so they fall at slow times.
Water-based acrylics have little odor. Some primers and silicones have more, so intakes near the work area are closed during application. Most tenants notice the work by sound more than smell.
Yes, when the tenants prefer it. Washing and spraying on a closed day keeps the noise away from customers. Weather still decides the final dates, since coating needs a dry roof and a dry forecast.
Your leases set that, and we leave it to you and your tenants. What we provide is a single inspection report and price for the whole roof, broken out by section if you need to divide it.
Call us right away. When a crew is on the roof, tracing that leak becomes the next task, and the section above that suite moves to the front of the order.
Yes. Front parapets on highway buildings take wind and sun from the street side and often hide sign mounts and edge gaps. We check them from the roof side and seal any openings before coating.
Share the number of suites and any active leaks. We plan the tenant notice and schedule around their hours.
Leave a name and number and a roofing contact will call you back.
Or call now: (928) 436-4811